|
Shenzhen O'CELL Technology Co.,Ltd
|
battery management system lifepo4 electric vehicle battery management system
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
BCK LiFePO4 Smart Battery Control Kit, Mini Batteries Management System
<sp
BCK LiFePO4 Smart Battery Control Kit, Mini Batteries Management System
Description:
The mini battery management system is built with 1 or up to 4 smart battery packs in series and Battery Control Kit(BCK,optional).
Main Feature
1. Up to 48V system can be built with battery packs.
2. High continuous discharge current is available.
3. BCK can balance the battery packs.
4. BCK can read and display the information of battery system.
Main Function
1. Measure the voltage of the battery packs in series and the whole system.
2. Measure the charge and discharge current of the battery system.
3. Calculate the SOC of the system.
4. Control system temperature.
5. Record running and fault data of the system .
Applications:
Through RS485 cables BCK can collect voltage, current, temperature and SOC data from battery packs. BCK can also balance the battery packs during charging. The system is suitable for small scale power system, such as
1. Mini motor car
2. Small medical equipments
3. Other small power system
Specifications:
|
Feature |
Comments |
|
RS-485 Communication |
RS-485 Communications is used to communicate with the battery modules. |
|
CAN interface
|
CAN interface will be used to communicate with the host or the charger. |
|
Charge Disconnect
|
When the battery modules are fully charged, they will communicate with the BMU and the BMU has the ability to turn off the charger or open the charger main contactor, interrupting current flow. |
|
Analog/Digital Communications
|
In case the host controller doesn’t have a CAN interface, the BMU communicates with the host via analog/digital signals. These signals include: Outputs – SOC (A), disable regen(D), early warning(D), BMU fault(D) Inputs- 12V ignition (D), vehicle fault (D), |
|
Discharge Interrupt
|
When the batteries are discharged to the under-voltage protection point, BMU will attempt to alert the host to inhibit discharge. If discharge continues beyond this warning, the BMU will request that the main contactor open or can open it itself. |
|
Insulation measurement |
The BMU will check to make sure the battery module is sufficiently isolated from the chassis before and after the main contactor is closed. |
|
Pre-charge circuit
|
To limit the inrush current into the systems capacitors, a pre-charge resistor
is connected to B+ before the main contactor&nbs
Shenzhen O'CELL Technology Co.,Ltd [China (Mainland)]
Business Type:Manufacturer |
